MaalonDrive® Space 8mm - Type 3

MaalonDrive®

Space 8mm - Type 3

Technical Supply Specifications

Features

  • High repeatability
  • Dry lubrication due to coatings
  • Suitable in wide temperature range
  • Zero backlash with optimised fit between speed and resolution
  • Preloaded ball bearing

Description

Dry lubrication, extremely small outer dimensions and robust operating behaviour characterise the MaalonDrive® Space 8mm - type 3 micro positioning system, which is designed for use in extreme environmental conditions. It can easily be actuated in an open loop control, as it is driven by a stepper motor with 20 steps per rotation. At the core of the drive is a zero-backlash MaalonDrive® gear with a reduction ratio of 160:1. On the output side, the micro gearbox is equipped with a preloaded ball bearing by means of which the application is optimally mounted.

Technical Parameter

Global System
Number Parameter Symbol Value Hint
P-001
Vacuum suitable UHV
P-003
Ratioi160 : 1 
P-004
Self-locking yes  
P-008
Repeatability unidirectional 70.5 arcsec 
P-009
Repeatability bidirectional 41.35 arcmin 
P-010
Accuracy 15.35 arcmin 
P-011
Transmission accuracy 30.7 arcmin 
P-012
Resolution 0.1125 ° 
P-013
Torsional stiffness 2.29 Nm/rad 
P-014
Lost motion 30 arcmin 
P-015
Backlash 0 arcmin 
P-016
Rated torqueT3 mNm 
P-017
Peak torqueT6 mNm 
P-018
Momentary peak torqueT20 mNm 
P-021
Rated input speedn1000 rpm 
P-022
Maximum input speedn1000 rpm 
P-023
Rated output speedn6.25 rpm 
P-024
Maximum output speedn6.25 rpm 
P-026
No-load starting torqueT135 μNm 
P-027
No-load running torqueT90 μNm 
P-028
Rated running torqueT1035 μNm 
P-034
Lifetime for rated operation 200 h 
P-035
Radial backlash output shaft 0 μm 
P-036
Axial backlash output shaft 0 μm 
P-037
Radial stiffnessc1.16 N/μm 
P-038
Axial stiffnessc18.5 N/μm 
P-039
Max. radial load on output shaft (non-operating, constant load)F25 N 
P-040
Max. radial load on output shaft (non-operating, impulsive load)F10 N 
P-041
Max. radial load on output shaft (operating, constant load)F4 N 
P-042
Max. radial load on output shaft (operating, impulsive load)F4 N 
P-043
Max. axial load on output shaft (non-operating, constantF64 N 
P-044
Max. axial load on output shaft (non-operating, impulsive load)F20 N 
P-045
Max. axial load on output shaft (operating, constant load)F185 N 
P-046
Max. axial load on output shaft (operating, impulsive load)F66 N 
P-055
Moment of inertiaI282 * 10-4 gcm2 
P-056
Weightm5.715 g 
P-057
Min. permissible ambient temperature (non-operating)T-30 °C 
P-058
Min. permissible ambient temperature (operating)T-30 °C 
P-059
Max. permissible ambient temperature (non-operating)T130 °C 
P-060
Max. permissible ambient temperature (operating)T70 °C 
Motor data: Schrittmotor AM 0820-2R-V-5-56-01-E340A
Number Parameter Symbol Value Hint
P-100Type of motor Stepper  
P-102
Maximum speed of motorn3000 rpm 
P-103
Resonance frequency of motorf 170 Hz 
P-105
Holding torque of motor (unpowered)T0.17 mNm 
P-109
Rated current of motorI0.225 mA 
P-111
Rated voltage of motorU2 V 
P-112
Phase resistance of motorR7.3 ohm 
P-113
Inductance of motorL1.4 mH 
P-114
Amplitude BEMF of motorU0.267 mV/rpm 
P-115
Full step angle of motor 18 ° 
P-116
Angular accuracy of step of motor ±1.8 ° 
P-117
Electrical time constant of motort 0.21 ms 
P-118
Max. coil temperature of motorT130 °C 
P-119
Thermal resistance of motor between coil and housingRth14.1 K/W 
P-120
Thermal resistance of motor between housing and airRth265.3 K/W 
P-121
Thermal time constant of the coil of the motorτw13500 ms 
P-122
Thermal time constant of the housing of the motorτw2160000 ms 
P-123
Insulation voltage of motorU200 V 
Material information
Number Parameter Symbol Value Hint
P-900
RoHS compliant yes  
P-901Lubrication of output bearing gearbox MoS2(drylubrication)  
P-903Lubrication of gear component set DICRONITE®/ MoS2  
P-904Lubrication of bearing motor MoS2(drylubrication)  
P-908Material of gear component set NiFe  
P-909Material of output bearing gearbox 1.4108 DIN EN  
P-911Material of bearing motor Stainless steel  
P-912Material of gearbox output side 1.4034 DIN EN  
P-914Material of motor housing Anodized aluminum  
P-019 Curve measured with 5x nominal voltage and load inertia 6*10E-9 kg/m² in ¼ micro steps. - Torque characteristic
P-029 Curve measured with 5x nominal voltage and load inertia 6*10E-9 kg/m² in ¼ micro steps. - Running torque characteristic

Technical Drawing

MaalonDrive® Space 8mm - Type 3
This Website uses Cookies to give best functionality. Read more …