CoograDrive® Cryo 8mm – Type 1
Thanks to the dry lubrication and the materials that are used, the extremely compact CoograDrive® Cryo 8mm – type 1 is especially well suited for applications in low temperature ranges.
At the heart of this durable micro gearbox is a low-backlash CoograDrive® gear with a reduction ratio of 40:1.
The micro gearbox is equipped with a preloaded ball bearing on the input and output side to which the application can be directly connected.
Benefits
1) Suitable in wide temperature range
2) Dry lubrication due to coatings
3) Use of high quality materials
4) Preloaded ball bearing
5) Transmission ratio optimized to torque
Technical parameters
The values shown are based on calculations and measurement procedures carried out by Micromotion GmbH, which are carried out according to the current state of the art. Our definitions can be found at www.micromotion-drives.com. For further information please contact sales@micromotion.de.
Nr.
Parameter
Symbol
Value
Properties
P-001
Vacuum suitable
UHV
P-003
Ratio
i
80 : 1
P-004
Self-locking
ja
P-008
Repeatability unidirectional
20 arcmin
P-009
Repeatability bidirectional
60 arcmin
P-010
Accuracy
30 arcmin
P-011
Transmission accuracy
60 arcmin
P-013
Torsional stiffness
3.90 Nm/rad
P-014
Lost motion
60 arcmin
P-015
Backlash
20 arcmin
P-016
Rated torque
T
10 mNm
P-017
Peak torque
T
80 mNm
P-018
Momentary peak torque
T
100 mNm
P-023
Rated output speed
n
0 rpm
P-024
Maximum output speed
n
0 rpm
P-026
No-load starting torque
T
247.5 μNm
P-027
No-load running torque
T
165 μNm
P-028
Rated running torque
T
2145 μNm
P-034
Lifetime for rated operation
200 h
P-035
Radial backlash output shaft
0 μm
P-036
Axial backlash output shaft
0 μm
P-037
Radial stiffness
c
0.87 N/μm
P-038
Axial stiffness
c
18.5 N/μm
P-039
Max. radial load on output shaft (non-operating, constant load)
F
20 N
P-040
Max. radial load on output shaft (non-operating, impulsive load)
F
5 N
P-041
Max. radial load on output shaft (operating, constant load)
F
3 N
P-042
Max. radial load on output shaft (operating, impulsive load)
F
3 N
P-043
Max. axial load on output shaft (non-operating, constant
F
64 N
P-044
Max. axial load on output shaft (non-operating, impulsive load)
F
20 N
P-045
Max. axial load on output shaft (operating, constant load)
F
185 N
P-046
Max. axial load on output shaft (operating, impulsive load)
F
66 N
P-047
Max. radial load on input shaft (non-operating, constant load)
F
20 N
P-048
Max. radial load on input shaft (non-operating, impulsive load)
F
6 N
P-049
Max. radial load on input shaft (operating, constant load)
F
11 N
P-050
Max. radial load on input shaft (operating, impulsive load)
F
6 N
P-051
Max. axial load on input shaft (non-operating, constant load)
F
49 N
P-052
Max. axial load on input shaft (non-operating, impulsive load)
F
15 N
P-053
Max. axial load on input shaft (operating, constant load)
F
147.5 N
P-054
Max. axial load on input shaft (operating, impulsive load)
F
61 N
P-055
Moment of inertia
I
46 * 10-4 gcm2
P-056
Weight
m
4 g
P-057
Min. permissible ambient temperature (non-operating)
T
-250 °C
P-058
Min. permissible ambient temperature (operating)
T
-200 °C
P-059
Max. permissible ambient temperature (non-operating)
T
150 °C
P-060
Max. permissible ambient temperature (operating)
T
120 °C
Material information
P-900
RoHS compliant
ja
P-901
Lubrication of output bearing gearbox
MoS2(drylubrication)
P-902
Lubrication of input bearing gearbox
MoS2(drylubrication)
P-903
Lubrication of gear component set
DICRONITE®/MoS2(drylubrication)
P-908
Material of gear component set
NiFe
P-909
Material of output bearing gearbox
1.4108 DIN EN
P-910
Material of input bearing gearbox
1.4108 DIN EN
P-912
Material of gearbox output side
1.4305 DIN EN
P-913
Material of gearbox input side
1.4305 DIN EN
Graphs
P-029
Alternative products
