CoograDrive® HighVac 10mm – Type 3
High torque capacity, low backlash, robust output
bearing and excellent controllability all in a very
small space – the CoograDrive® HighVac 10mm – Type 3.
The combination of a low-backlash CoograDrive® gear
with a reduction ratio of 80:1 with a brushless DC
motor with rated voltage of 6V and an integrated
encoder with a resolution of 1024 pulses per rotation
results in a high-performance, high-precision micro
positioning system.
It is the ideal solution for applications in extreme
environmental conditions and tight space conditions.
Because Braycote is used as lubricant for the ball
bearings as well as for the gear component set, it
can be used in high-vacuum environments.
The output shaft is precisely guided by preloaded
ball bearings and thereby allow the application to be
directly connected.
Benefits
1) Vacuum suitable lubrication
2) Use of high quality materials
3) Preloaded ball bearing
4) Easy controllability
5) Transmission ratio optimized to torque
Technical parameters
The values shown are based on calculations and measurement procedures carried out by Micromotion GmbH, which are carried out according to the current state of the art. Our definitions can be found at www.micromotion-drives.com. For further information please contact sales@micromotion.de.
Nr.
Parameter
Symbol
Value
Properties
P-001
Vacuum suitable
HV
P-003
Ratio
i
80 : 1
P-004
Self-locking
ja
P-008
Repeatability unidirectional
4.5 arcmin
P-009
Repeatability bidirectional
45 arcmin
P-010
Accuracy
30 arcmin
P-011
Transmission accuracy
60 arcmin
P-012
Resolution
0.00439 °
P-013
Torsional stiffness
3.80 Nm/rad
P-014
Lost motion
45 arcmin
P-015
Backlash
20 arcmin
P-016
Rated torque
T
15 mNm
P-017
Peak torque
T
100 mNm
P-018
Momentary peak torque
T
120 mNm
P-021
Rated input speed
n
10000 rpm
P-022
Maximum input speed
n
30000 rpm
P-023
Rated output speed
n
125 rpm
P-024
Maximum output speed
n
375 rpm
P-026
No-load starting torque
T
180 μNm
P-027
No-load running torque
T
120 μNm
P-028
Rated running torque
T
1570 μNm
P-034
Lifetime for rated operation
500 h
P-035
Radial backlash output shaft
0 μm
P-036
Axial backlash output shaft
0 μm
P-037
Radial stiffness
c
2.3 N/μm
P-038
Axial stiffness
c
40 N/μm
P-039
Max. radial load on output shaft (non-operating, constant load)
F
55 N
P-040
Max. radial load on output shaft (non-operating, impulsive load)
F
20 N
P-041
Max. radial load on output shaft (operating, constant load)
F
7 N
P-042
Max. radial load on output shaft (operating, impulsive load)
F
7 N
P-043
Max. axial load on output shaft (non-operating, constant
F
150 N
P-044
Max. axial load on output shaft (non-operating, impulsive load)
F
50 N
P-045
Max. axial load on output shaft (operating, constant load)
F
380 N
P-046
Max. axial load on output shaft (operating, impulsive load)
F
127 N
P-055
Moment of inertia
I
660.01 * 10-4 gcm2
P-057
Min. permissible ambient temperature (non-operating)
T
-72 °C
P-058
Min. permissible ambient temperature (operating)
T
-10 °C
P-059
Max. permissible ambient temperature (non-operating)
T
125 °C
P-060
Max. permissible ambient temperature (operating)
T
100 °C
Motor data: EC-Motor 1028S012B high vacuum
P-100
Motortype
EC
P-102
Maximum speed of motor
n
79000 rpm
P-104
Speed constant of motor
Kn
2825 rpm/V
P-106
Stall torque of motor
T
9.22 mNm
P-107
Torque constant of motor
Km
3.38 mNm/A
P-108
No-load current of motor
I
65 mA
P-110
Max. continuous current of motor
I
570 mA
P-111
Rated voltage of motor
U
12 V
P-112
Phase resistance of motor
R
4.37 ohm
P-113
Inductance of motor
L
0.087 mH
P-114
Amplitude BEMF of motor
U
0.354 mV/rpm
P-118
Max. coil temperature of motor
T
125 °C
P-119
Thermal resistance of motor between coil and housing
Rth1
6.6 K/W
P-120
Thermal resistance of motor between housing and air
Rth2
42.4 K/W
P-121
Thermal time constant of the coil of the motor
τw1
4200 ms
P-122
Thermal time constant of the housing of the motor
τw2
152000 ms
Encoder data
P-201
Impulses per revolution of encoder
1024
P-202
Channels of encoder
A, B, I
P-203
Frequency range of encoder
f
500 kHz
P-204
Operating voltage of encoder
U
5 ±0.5 V
P-205
Rated current consumption of encoder
I
max. 23 mA
P-206
Output current of encoder
I
4 mA
P-207
Signal/phase shifting of encoder
90±75 °
P-208
Signal build-up/decay time of encoder
t
0.1/0.1 ms
Material information
P-900
RoHS compliant
ja
P-901
Lubrication of output bearing gearbox
Braycote601EF
P-903
Lubrication of gear component set
Braycote601EF
P-904
Lubrication of bearing motor
Braycote601EF
P-908
Material of gear component set
NiFe
P-909
Material of output bearing gearbox
1.4108 DIN EN
P-912
Material of gearbox output side
1.4305 DIN EN
P-914
Material of motor housing
Aluminium
Graphs
P-019
P-029
Alternative products
