MaalonDrive® MedTec 13mm - Type 1

MaalonDrive® MedTec 13mm – Type 1

The MaalonDrive® MedTec 13mm – type 1 micro positioning gear can be fully sterilised and is equipped with an extremely durable output bearing. It was specially designed for use in medical technology.
Located on both the input side as well as on the output side are preloaded ball bearings by means of which the application can be directly connected.
At the heart of this extremely high-reduction and zero-backlash micro gearbox is a MaalonDrive® gear with a reduction ratio of 1000:1 in just a single stage.

Benefits

1) Fast delivery
2) High repeatability
3) Sterilizable
4) Preloaded ball bearing
5) Zero backlash with ultra high transmission ratio

Technical parameters

The values shown are based on calculations and measurement procedures carried out by Micromotion GmbH, which are carried out according to the current state of the art. Our definitions can be found at www.micromotion-drives.com. For further information please contact sales@micromotion.de.
Nr.
Parameter
Symbol
Value
Properties
P-002
Sterilizable
ja
P-003
Ratio
i
1000 : 1
P-004
Self-locking
ja
P-008
Repeatability unidirectional
15 arcsec
P-009
Repeatability bidirectional
30 arcmin
P-010
Accuracy
15 arcmin
P-011
Transmission accuracy
30 arcmin
P-013
Torsional stiffness
3.80 Nm/rad
P-014
Lost motion
30 arcmin
P-015
Backlash
0 arcmin
P-016
Rated torque
T
9 mNm
P-017
Peak torque
T
19 mNm
P-018
Momentary peak torque
T
47 mNm
P-021
Rated input speed
n
10000 rpm
P-022
Maximum input speed
n
30000 rpm
P-023
Rated output speed
n
10 rpm
P-024
Maximum output speed
n
10 rpm
P-026
No-load starting torque
T
300 μNm
P-027
No-load running torque
T
200 μNm
P-028
Rated running torque
T
1440 μNm
P-034
Lifetime for rated operation
500 h
P-035
Radial backlash output shaft
0 μm
P-036
Axial backlash output shaft
0 μm
P-037
Radial stiffness
c
5.07 N/μm
P-038
Axial stiffness
c
70.5 N/μm
P-039
Max. radial load on output shaft (non-operating, constant load)
F
115 N
P-040
Max. radial load on output shaft (non-operating, impulsive load)
F
40 N
P-041
Max. radial load on output shaft (operating, constant load)
F
16 N
P-042
Max. radial load on output shaft (operating, impulsive load)
F
16 N
P-043
Max. axial load on output shaft (non-operating, constant
F
272 N
P-044
Max. axial load on output shaft (non-operating, impulsive load)
F
90 N
P-045
Max. axial load on output shaft (operating, constant load)
F
705 N
P-046
Max. axial load on output shaft (operating, impulsive load)
F
242 N
P-047
Max. radial load on input shaft (non-operating, constant load)
F
15 N
P-048
Max. radial load on input shaft (non-operating, impulsive load)
F
6 N
P-049
Max. radial load on input shaft (operating, constant load)
F
12 N
P-050
Max. radial load on input shaft (operating, impulsive load)
F
6 N
P-051
Max. axial load on input shaft (non-operating, constant load)
F
30 N
P-052
Max. axial load on input shaft (non-operating, impulsive load)
F
10 N
P-053
Max. axial load on input shaft (operating, constant load)
F
100 N
P-054
Max. axial load on input shaft (operating, impulsive load)
F
38 N
P-055
Moment of inertia
I
55 * 10-4 gcm2
P-056
Weight
m
11 g
P-057
Min. permissible ambient temperature (non-operating)
T
-80 °C
P-058
Min. permissible ambient temperature (operating)
T
-10 °C
P-059
Max. permissible ambient temperature (non-operating)
T
150 °C
P-060
Max. permissible ambient temperature (operating)
T
120 °C
Material information
P-900
RoHS compliant
ja
P-901
Lubrication of output bearing gearbox
BarriertaL55/2
P-902
Lubrication of input bearing gearbox
BarriertaL55/2
P-903
Lubrication of gear component set
BarriertaL55/2
P-908
Material of gear component set
NiFe
P-909
Material of output bearing gearbox
1.4108 DIN EN
P-910
Material of input bearing gearbox
1.4108 DIN EN
P-912
Material of gearbox output side
1.4301 DIN EN
P-913
Material of gearbox input side
1.4305 DIN EN

Graphs

P-029
Without load,At rated torque,At peak torque,

Alternative products

High repeatability
Vacuum suitable lubrication
Preloaded ball bearing
Robust control without feedback system
Zero backlash at high resolution
High repeatability
Lifetime lubrication
Preloaded ball bearing
Easy controllability
Zero backlash at high speed
Vacuum suitable lubrication
Preloaded ball bearing
Easy controllability
Zero backlash at high resolution
Integrated overload clutch to prevent for demaginig
High repeatability
Vacuum suitable lubrication
Preloaded ball bearing
Easy controllability
Zero backlash with optimised fit between speed and resolution
Lifetime lubrication
Preloaded ball bearing
Custom designed output shaft
Custom designed connecting flange
Transmission ratio optimized to torque
High repeatability
Lifetime lubrication
Preloaded ball bearing
Robust control without feedback system
Zero backlash at ultra high resolution
Hollow shaft thru center of rotational axis
Sterilizable
Preloaded ball bearing
Simple integration to the application
Transmission ratio optimized to speed
High repeatability
Lifetime lubrication
Preloaded ball bearing
Easy controllability
Zero backlash with optimised fit between speed and transmission ratio