RasuunDrive® BallScrew 10mm – Type 24
The compact RasuunDrive® BallScrew 10mm – type 24 provides a travel range of up to 15 mm. This is possible thanks to the combination of a DC Motor, a sturdy, low backlash CoograDrive® gear and a ball screw. The CoograDrive® gear comes with a reduction ratio of 40:1. Directly integrated in the preloaded bearing (by X-arrangement) of the gear output shaft is the ball screw with a pitch of 1 mm. The preload of the outputbearing is 20 N. The load capacity of the ball bearing in axial direction is 134 N and in radial direction 77 N. The associated technical drawing is C-280-100-001.
Benefits
1) Flexible integration
2) Vacuum suitable lubrication
3) Easy controllability
4) High adjustment speed
5) Ball screw
Technical parameters
The values shown are based on calculations and measurement procedures carried out by Micromotion GmbH, which are carried out according to the current state of the art. Our definitions can be found at www.micromotion-drives.com. For further information please contact sales@micromotion.de.
Nr.
Parameter
Symbol
Value
Properties
P-001
Vacuum suitable
HV
P-003
Ratio
i
40 : 1
P-004
Self-locking
ja
P-005
Travel range
s
15 mm
P-008
Repeatability unidirectional
0 μm
P-009
Repeatability bidirectional
0 μm
P-014
Lost motion
2.1 μm
P-015
Backlash
0 μm
P-016
Rated force
F
46 N
P-017
Peak force
F
46 N
P-018
Momentary peak force
F
46 N
P-023
Rated speed
v
4.16667 mm/s
P-024
Maximum speed
v
6.25 mm/s
P-034
Lifetime for rated operation
500 h
P-035
Radial backlash output shaft
0 μm
P-036
Axial backlash output shaft
0 μm
P-044
Max. axial load on output shaft (non-operating, impulsive load)
F
46 N
P-055
Moment of inertia
I
1138.17 * 10-4 gcm2
P-057
Min. permissible ambient temperature (non-operating)
T
-30 °C
P-058
Min. permissible ambient temperature (operating)
T
-10 °C
P-059
Max. permissible ambient temperature (non-operating)
T
85 °C
P-060
Max. permissible ambient temperature (operating)
T
85 °C
Motor data: DC-Motor 1024 012S K2567 Ball bearing front
P-100
Motortype
DC
P-101
Rated speed of motor
n
7780 rpm
P-102
Maximum speed of motor
n
15000 rpm
P-104
Speed constant of motor
Kn
1078 rpm/V
P-106
Stall torque of motor
T
4.45 mNm
P-107
Torque constant of motor
Km
8.86 mNm/A
P-108
No-load current of motor
I
4 mA
P-110
Max. continuous current of motor
I
180 mA
P-111
Rated voltage of motor
U
12 V
P-112
Phase resistance of motor
R
23.7 ohm
P-113
Inductance of motor
L
0.218 mH
P-114
Amplitude BEMF of motor
U
0.928 mV/rpm
P-118
Max. coil temperature of motor
T
85 °C
P-119
Thermal resistance of motor between coil and housing
Rth1
16 K/W
P-120
Thermal resistance of motor between housing and air
Rth2
51 K/W
P-121
Thermal time constant of the coil of the motor
τw1
6100 ms
P-122
Thermal time constant of the housing of the motor
τw2
251000 ms
Data limit switch
P-302
Configuration Limit switches
n.c.
Spindle data: BallScrew – 3mm diameter, 1mm pitch, 15mm stroke, backlash free
P-402
Pitch
R
1 mm
Material information
P-900
RoHS compliant
ja
P-901
Lubrication of output bearing gearbox
Braycote601EF
P-903
Lubrication of gear component set
Braycote601EF
P-905
Lubrication of spindel-nut-system
Braycote601EF
P-908
Material of gear component set
NiFe
P-909
Material of output bearing gearbox
1.4108 DIN EN
P-911
Material of bearing motor
stainless steel
P-912
Material of gearbox output side
1.4305 DIN EN
P-914
Material of motor housing
Steel, nickel plated
P-917
Material of spindle
1.4034
Graphs
P-019
Alternative products
