KeevoDrive® HighAcc 19mm – Type 1
The KeevoDrive® HighAcc 19mm – type 1 is a micro positioning system which builds upon an eccentric with eccentricity of 3000 µm and travel range of up to 6000 µm.
The system can easily be operated in an open loop control, as it is driven by a stepper motor with 200 steps per rotation.
At the heart of this dynamic and reliable micro system is a low-backlash CoograDrive® gear with a reduction ratio of 80:1.
Benefits
1) High reliability
2) Robust control without feedback system
3) High load capacity of output bearing
4) High adjustment force
5) Step with in the range of nm
Technical parameters
The values shown are based on calculations and measurement procedures carried out by Micromotion GmbH, which are carried out according to the current state of the art. Our definitions can be found at www.micromotion-drives.com. For further information please contact sales@micromotion.de.
Nr.
Parameter
Symbol
Value
Properties
P-003
Ratio
i
80 : 1
P-004
Self-locking
ja
P-005
Max. travel range
s
6000 μm
P-015
Backlash
0 μm
P-016
Rated force
F
5 N
P-017
Peak force
F
33.3333 N
P-018
Momentary peak force
F
40 N
P-034
Lifetime for rated operation
1000 h
P-035
Radial backlash output shaft
0 μm
P-036
Axial backlash output shaft
0 μm
P-037
Radial stiffness
c
4.35 N/μm
P-038
Axial stiffness
c
40 N/μm
P-039
Max. radial load on output shaft (non-operating, constant load)
F
80 N
P-040
Max. radial load on output shaft (non-operating, impulsive load)
F
25 N
P-041
Max. radial load on output shaft (operating, constant load)
F
20 N
P-042
Max. radial load on output shaft (operating, impulsive load)
F
20 N
P-043
Max. axial load on output shaft (non-operating, constant
F
150 N
P-044
Max. axial load on output shaft (non-operating, impulsive load)
F
50 N
P-045
Max. axial load on output shaft (operating, constant load)
F
380 N
P-046
Max. axial load on output shaft (operating, impulsive load)
F
127 N
P-055
Moment of inertia
I
900038 * 10-4 gcm2
P-056
Weight
m
112 g
P-057
Min. permissible ambient temperature (non-operating)
T
-20 °C
P-058
Min. permissible ambient temperature (operating)
T
-20 °C
P-059
Max. permissible ambient temperature (non-operating)
T
120 °C
P-060
Max. permissible ambient temperature (operating)
T
120 °C
Motor data: Stepper ZSS 19.200.0,6-2g5-BC-R
P-100
Motortype
Stepper
P-102
Maximum speed of motor
n
6000 rpm
P-105
Holding torque of motor (unpowered)
T
0.9 mNm
P-109
Rated current of motor
I
600 mA
P-111
Rated voltage of motor
U
42 V
P-112
Phase resistance of motor
R
2.1 ohm
P-113
Inductance of motor
L
0.85 mH
P-115
Full step angle of motor
1.8 °
P-116
Angular accuracy of step of motor
±0.09 °
P-117
Electrical time constant of motor
t
0.367 ms
P-118
Max. coil temperature of motor
T
120 °C
Excenter data
P-501
Eccentricity
3000 μm
P-504
Max. radial load on eccentric bearing (non-operating, constant load)
F
33.3333 N
P-505
Max. radial load on eccentric bearing (non-operating, impulsive load)
F
25 N
P-506
Max. radial load on eccentric bearing (operating, constant load)
F
20 N
P-507
Max. radial load on eccentric bearing (operating, impulsive load)
F
20 N
P-508
Max. axial load on eccentric bearing (non-operating, constant load)
F
150 N
P-509
Max. axial load on eccentric bearing (non-operating, impulsive load)
F
50 N
P-510
Max. axial load on eccentric bearing (operating, constant load)
F
380 N
P-511
Max. axial load on eccentric bearing (operating, impulsive load)
F
127 N
P-513
Eccentricity error
20 μm
Material information
P-900
RoHS compliant
ja
P-901
Lubrication of output bearing gearbox
Longtime PD2
P-903
Lubrication of gear component set
Molykote BR 2 plus
P-907
Lubrication of eccentric bearing
Longtime PD2
P-908
Material of gear component set
NiFe
P-909
Material of output bearing gearbox
1.4108 DIN EN
P-912
Material of gearbox output side
1.4305 DIN EN
P-915
Material of eccentric bearing
1.4108
Graphs
P-005
P-008
P-009
P-012
P-016
P-502
P-512
Alternative products
